White Papers

clear ipv6 mld snooping groups
Clear entries from the group cache table.
Syntax
clear ipv6 mld snooping groups [interface | group-address]
Parameters
interface Enter the following keywords and slot/port or number information:
● For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet
followed by the slot/port information.
● For a Port Channel interface, enter the keywords port-channel then a
number.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
● For a VLAN, enter the keyword vlan followed by a number from 1 to 4094.
group-address (OPTIONAL) Enter the group address in the following format: x:x:x:x::x. The ::
notation specifies successive hexadecimal fields of zero.
Defaults None.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.14(0.0) Introduced on the S3048–ON, S4048–ON, S4048T-ON, S5048F-ON, S6000–ON,
S6010–ON, S6100–ON, Z9100–ON, S3100, and C9010.
debug ipv6 mld snooping
Enable debugging on IPv6 MLD snooping packets.
Syntax
debug ipv6 mld {group-address | interface}
To turn off debugging, use the no debug ipv6 mld {group-address | interface} command.
Parameters
group-address (OPTIONAL) Enter the multicast group address in the x:x:x:x::x format. The ::
notation specifies successive hexadecimal fields of zero.
interface Enter the following keywords and slot/port or number information:
● For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet
followed by the slot/port information.
● For a Port Channel interface, enter the keywords port-channel then a
number.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
● For a VLAN, enter the keyword vlan followed by a number from 1 to 4094.
Defaults Disabled.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.14(0.0) Introduced on the S3048–ON, S4048–ON, S4048T-ON, S5048F-ON, S6000–ON,
S6010–ON, S6100–ON, Z9100–ON, S3100, and C9010.
Multicast Listener Discovery Protocol 983