Administrator Guide

Example
(Multiple Ports)
DellEMC(conf)# interface range tengigabitethernet 1/1/1/1 - 1/1/4/3,
tengigabitethernet 1/1/3/2 - 1/1/4/1
DellEMC(conf-if-range-te-1/1/1/1-1/1/4/3)#
Example
(Overlapping
Ports)
DellEMC(conf)# interface range tengigabitethernet 1/1/1/1 - 1/1/3/1,
tengigabitethernet 1/1/1/1 - 1/1/4/3
DellEMC(conf-if-range-te-1/1/1/1-1/1/4/3)#
Usage
Information
Only VLAN and port-channel interfaces created using the interface vlan and interface port-
channel commands can be used in the interface range command.
Use the show running-config command to display the VLAN and port-channel interfaces. VLAN
or port-channel interfaces that are not displayed in the show running-config command cannot be
used with the bulk configuration feature of the interface range command. You cannot create virtual
interfaces (VLAN, Port-channel) using the interface range command.
NOTE: If a range has VLAN, physical and port-channel interfaces, only commands related to physical
interfaces can be bulk configured. To configure commands specific to VLAN and port-channel only
those respective interfaces should be configured in a particular range.
Example (Single
Range)
This example shows a single range bulk configuration.
DellEMC(config)# interface range tengigabitethernet 1/1/1/1 - 1/1/7/3
DellEMC(config-if-range-te-1/1/1/1-1/1/7/3)# no shutdown
Example
(Multiple Range)
This example shows how to use commas to add different interface types to a range of interfaces.
DellEMC(config-if)# interface range tengigabitethernet 1/1/1/1 -
1/1/2/3, hundredGigE 1/24 - 1/29
DellEMC(config-if-range-te-1/1/1/1-1/1/2/3,hu-1/24-1/29)# no shutdown
Example
(Multiple Range)
This example shows how to use commas to add VLAN and port-channel interfaces to the range.
DellEMC(config-if)# interface range tengigabitethernet 1/1/1/1 -
1/1/2/3, tengigabitethernet 1/1/3/1 –1/1/4/4,
Vlan 2–100, Port 1–25
DellEMC(config-if-range-
te-1/1/1/1-1/1/2/3,te-1/1/3/1-1/1/4/4,vl-2-100,po-1-25)# no shutdown
DellEMC(config-if-range)#
Example
(Batch Mode
Configuration)
Primary VLT
DellEMC(conf-b)#int range Tengigabitethernet 3/0 - 5
DellEMC(conf-if-range-te-3/0-5)#mtu 4500
DellEMC(conf-if-range-te-3/0-5)#exit
DellEMC(conf-b)#show conf
interface range tengigabitethernet 3/0 - 5
mtu 4500
DellEMC(conf-b)#commit
DellEMC(conf-b)#Dec 6 11:30:45 %RPM1-P:CP %CLIBATCH-6-
CLI_BATCH_CONFIG_IN_PROGRESS_TRAP: Batch configuration commit is in
progress
Dec 6 11:30:45 %RPM1-P:CP %CLIBATCH-6-CLI_BATCH_CONFIG_COMPLETE_TRAP:
Batch configuration commit is success
Secondary VLT
Dec 6 10:43:17 %RPM1-P:CP %CLIBATCH-6-
CLI_BATCH_CONFIG_IN_PROGRESS_TRAP: Batch configuration commit is in
progress
Dec 6 10:43:18 %RPM1-P:CP %CLIBATCH-6-CLI_BATCH_CONFIG_COMPLETE_TRAP:
Batch configuration commit is success
672 Interfaces