Administrator Guide

L2PM 0 0x00000000 0x00000000 0x87ff79ff 0x0e032200 45
ACL 0 0x00000000 0x00000000 0x867f50c3 0x000f0218 44
OSPF 0 0x00000dfa 0x00400098 0x00000000 0x00000000 0
PIM 0 0x000000f3 0x00030000 0x00000000 0x00000000 0
IGMP 0 0x000e027f 0x00000000 0x00000000 0x00000000 0
SNMP 0 0x00000000 0x00000000 0x800302c0 0x00000002 30
EVTTERM 0 0x00000000 0x00000000 0x800002c0 0x00000000 29
MRTM 0 0x00000000 0x00000200 0x81f7103f 0x00000000 38
DSM 0 0x00000000 0x00000000 0x80771003 0x00000000 32
LACP 0 0x00000000 0x00000000 0x8000383f 0x00000000 35
DHCP 0 0x00000000 0x00000000 0x800000c2 0x0000c000 37
V6RAD 0 0x00000433 0x00030000 0x00000000 0x00000000 0
Unidentified Client0 0x006e0002 0x00000000 0x00000000 0x00000000 0
DellEMC#
show system
Display the status of all stack members or a specific member.
Syntax
show system [brief | stack-unit unit-id [disabled—ports]]
Parameters
brief (OPTIONAL) Enter the keyword brief to view an abbreviated list of system
information.
stack-unit unit-id (OPTIONAL) Enter the keywords stack-unit then the stack member ID for
information on that stack member.
stack-unit unit-id
disabled-ports
(OPTIONAL) Enter the keyword stack-unit followed by stack member ID for
the information on that stack number and followed by the disabled-ports for the
information on the ports that are disabled.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Added support for the disabled-ports parameter .
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.11.4 The brief parameter no longer displays the current Reload mode. To display
Reload mode, use the show reload-type command. Modified the show
system stack-unit command output to support Piece Part ID (PPID).
Control and Monitoring 141