Administrator Guide

Version Description
9.14(0.0) Introduced on the S6000, S6000–ON, S6010-ON, S4048-ON, S4048T-ON,
S5048F-ON, S6100-ON, and Z9100-ON.
remote-vtep-ip
Create a remote VTEP and associate it to specified VNIDs.
Syntax
remote—vtep—ip IP Address vni-profile profile name
To delete the remote VTEP, use the no remote—vtep—ip command.
Parameters
IP Address Enter the IP Address of the remote VTEP.
vni-profile Enter the keyword vni-profile followed by the profile name to which the
remote VTEP has to be associated.
Defaults None.
Command Modes VXLAN-INSTANCE
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON,
and Z9100–ON.
Usage
Information
Use this command to associate a specific VNID to a remote VTEP. Provide a valid profile name while
associating to the remote VTEP.
NOTE: The remote VTEP IP Address cannot be any of the local IP Addresses configured in the
switch.
vnid
Associate a range of VNID numbers to a specific VNI profile.
Syntax
vnid VNID-Range
To remove the association, use the no vnid command.
Parameters
VNID-Range Enter the range of VNIDs that need to be members of the specific VNI profile. The
range is from 1 to 16777215.
Defaults None.
Command Modes VNI-PROFILE
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON,
and Z9100–ON.
Usage
Information
Use this command to associate the specified range of VNIDs to a VNI profile.
Virtual Extensible LAN (VXLAN) 1655