Administrator Guide

uplink-state-
group
for the uplink state group configuration
users
for the current users configuration
vlt
for the current VLT configuration
wred-profile
for the current wred-profile configuration
configured (OPTIONAL) Enter the keyword configuration to display line card interfaces
with non-default configurations only.
status (OPTIONAL) Enter the keyword status to display the checksum for the running
configuration and the start-up configuration.
compressed (Optional) Enter the keyword compressed to display the compressed group
configuration. Displays the compressed configuration by grouping all similar
configurations. The compression is done only for interface related configurations.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.2.(0.0) Added support for the tunnel and EIS interface types.
9.0.0.0 Added support for the VLT option.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added the hardware-monitor option.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Expanded to include the last configuration change, start-up last updated (date and
time), and who made the change.
6.5.4.0 Added the status option.
Example
DellEMC# show running-config
Current Configuration ...
! Version 9-0(2-0)
! Last configuration change at Thu Apr 18 10:18:39 2013 by admin
! Startup-config last updated at Thu Apr 18 10:18:40 2013 by admin
!
File Management 75