White Papers

Parameters
session-ID (OPTIONAL) Enter a session identification number. The range is from 0 to 65535.
[access-list] (OPTIONAL) Enter the access-list keyword to display the ACLs applied to
monitor sessions.
Defaults none
Command Modes
● EXEC
● as
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.14(0.0) Updated to display the IPv6 ACLs applied to monitor session on the S6000,
S6000–ON, S5048F-ON, S6100–ON, and Z9100–ON.
9.12(0.0) Introduced the access-list optional keyword to display the ACLs applied to
monitor sessions on the S6000, S6100–ON and Z9100–ON.
9.11(0.0) Introduced the support for GRE Protocol and FC Monitor in the command output.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.4.0.0 Added support for the RPM / ERPM.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series.
7.7.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series.
Example
Example (show
monitor session
access-list)
The following is an example output of the show monitor session access-list command.
Related
Commands
● monitor session — creates a monitoring session.
● rate-limit — configures the rate-limit.
Port Monitoring 1131