White Papers

To remove the description, use the no description {description} command.
Parameters
description Enter a description to identify the policies (80 characters maximum).
Defaults none
Command Modes CONFIGURATION (policy-map-input and policy-map-output; conf-qos-policy-in and conf-qos-policy-out;
wred)
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
pre- 7.7.1.0 Introduced.
Related
Commands
● policy-map-input — creates an input policy map.
● policy-map-output — creates an output policy map.
● qos-policy-input — creates an input QoS-policy on the router.
● qos-policy-output — creates an output QoS-policy on the router.
● wred-profile — creates a WRED profile.
dynamic-buffer-limit
Assign the number of bytes in KB in the dynamic buffer pool for a particular class of traffic .
Syntax
dynamic-buffer-limit buffer-value
To remove the dynamic buffer limit, use the no dynamic-buffer-limit command.
Parameters
buffer-value Enter the buffer value in kilobytes. The range is from 0 to 12288.
Defaults none
Command Modes CONFIGURATION (conf-qos-policy-out)
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6000.
1166 Quality of Service (QoS)