Manualshelf

White Papers

ManualsBrandsDell ManualsAccess PlatformsOS9
1461146214631464146514661467146814691470
Table Of Contents
Version Description
9.10(0.0) Introduced on the S6000, S6000–ON, S6100–ON, Z9100–ON.
Usage
Information
The show storm-control pfc status command is used to view the status of the PFC storm on
the specified stack unit and the port set.
Example
clear storm-control pfc drop-counters
Clears all the ingress & egress drop counters and time since discard. The counters are reset and started afresh from 0.
Syntax
clear storm-control pfc drop-counters stack-unit {unit-number} port-set
{portpipe-number}
Parameters
unit-number
Enter the stack unit number.
portpipe-number
Enter the port set number.
Defaults None
Command Modes EXEC Privilege.
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S6000, S6000–ON, S6100–ON, Z9100–ON.
Usage
Information
The clear storm-control pfc drop-counters command is used to clears all the ingress &
egress drop counters and time since discard on the specified stack unit and port set.
Related
Commands
show storm-control pfc status — view the status of the PFC storm on a stack unit with a specific port
set.
show storm-control pfc statistics
You can view the statistical details of the PFC storm on a stack unit with specified port set.
Syntax
show storm-control pfc statistics stack-unit {unit-number} port-set
{portpipe-number
Parameters
unit-number
Enter the stack unit number.
portpipe-number
Enter the port set number.
Defaults None
Command Modes EXEC Privilege.
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6000, S6000–ON, S6100–ON, Z9100–ON.
Usage
Information
The show storm-control pfc statistics command is used to view the statistical data of the
PFC storm on the specified stack unit and the port set.
Example
1464 Storm Control