White Papers

Version Description
9.4.(0.0) Introduced on the S6000.
Example
DellEMC#show vxlan vxlan-instance 1 physical-locator
Instance : 1
Tunnel : count 1
36.1.1.1 : vxlan_over_ipv4 (up)
Related
Commands
vxlan-instance — Enable VXLAN Instance configuration on the platform.
show vxlan vxlan-instance statistics interface
Displays the port VLAN statistics information related to Network Virtualization Overlay (NVO) Gateway.
Syntax
show vxlan vxlan-instance instance ID statisitics
interface interface VLAN-ID
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the
initial release.
interface Enter the following keywords and the interface information:
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
● For a Port Channel, enter the keywords port-channel.
VLAN-ID Enter the VLAN ID.
Defaults Disabled
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON,
and Z9100–ON.
Example
Related
Commands
vxlan-instance- Enable VXLAN Instance configuration on the platform.
show vxlan vxlan-instance statistics remote-vtep-ip
Displays VXLAN statistics for a specific VXLAN tunnel.
Syntax
show vxlan vxlan-instance instance ID statistics remote-vtep-ip IP Address
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the
initial release.
1604 Virtual Extensible LAN (VXLAN)