White Papers

ManualsBrandsDell ManualsAccess PlatformsOS9

1621

Table Of Contents

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

9.0.0.0 Introduced on the Z9000.

8.3.19.0 Introduced on the S4820T.

8.3.8.0 Introduced on the S4810.

Usage

Information

This command applies to a single interface. When you use this command with the vrrp delay reload

command, the later timer rules VRRP enabling. For example, if vrrp delay reload is 600 and vrrp

delay minimum is 300:

● When the system reloads, VRRP waits 600 seconds (10 minutes) to bring up VRRP on all interfaces

that are up and configured for VRRP.

● When an interface comes up, whether as part of a system reload or an interface reload, the system

waits 300 seconds (5 minutes) to bring up VRRP on that interface.

Command

● vrrp delay reload — sets the delay time for VRRP initialization after a system reboot.

vrrp delay reload

Set the delay time for VRRP initialization after a system reboot.

Syntax

vrrp delay reload seconds

Parameters

seconds

Enter the number of seconds for the delay. The frange is from 0 to 900 (0

indicates no delay).

Defaults 0

Command Modes INTERFACE

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100–ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.