White Papers

Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.4.2.1 Added the mac-address option on the C-Series and S-Series.
7.6.1.0 Introduced on the C-Series, E-Series, and S-Series.
Usage
Information
If you enable 802.1X multi-supplicant authentication on a port, additional 802.1X configuration details
(Port Authentication status, Untagged VLAN ID, Authentication PAE state, and Backend state) display for
each supplicant, as shown in the following example.
Example
Example (mac-
address)
show dot1x profile
Display all the dot1x profiles or the details of a specific profile configured in the system.
Syntax
show dot1x profile profile-name
Parameters
profile-name Specify a static dot1x profile-name. The maximum character limit for a profile name
is 32 characters.
Defaults None
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S3100 series, S4048–ON, S4048–ON, S4810, S4820T, S5000,
S6000, S6000–ON, S6100–ON, C9010, Z9100–ON, and Z9500.
9.9(0.0) Introduced on the C9010.
Example
DellEMC#show dot1x profile
802.1x profile information
-----------------------------
Dot1x Profile mySupplicants
Profile MACs
00:50:56:aa:01:10 00:50:56:aa:01:11
174 802.1X