White Papers

Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.8.0 Added support for BFD for BGP on the S4810.
8.4.1.3 Added support for BFD for BGP on the E-Series.
8.2.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the C-Series.
7.5.1.0 Added support for BFD for VLAN and port-channel interfaces on the E-Series.
7.4.1.0 Introduced BFD on physical ports on the E-Series.
Example
The following example shows the show bfd neighbors command output for the default VRF.
Example (Detail)
Related
Commands
● bfd all-neighbors — establish BFD sessions with all neighbors discovered by the IS-IS protocol or
OSPF protocol out of all interfaces.
vrrp bfd neighbor
Establish a BFD for VRRP session with a neighbor.
Syntax
vrrp bfd neighbor ip-address
To remove the BFD session with the neighbor, use the no vrrp bfd neighbor ip-address
command.
Parameters
ip-address Enter the IP address of the neighbor in dotted decimal format (A.B.C.D).
Defaults None
Command Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.10.0 Introduced on the S4810.
8.2.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the C-Series.
7.5.1.0 Added support for VLAN and port-channel interfaces on the E-Series.
Bidirectional Forwarding Detection (BFD) 325