White Papers

show hardware buffer service-pool
Displays the buffer details for the service pool. You can verify the total buffer allocated to the lossy and lossless traffic in the
service pool.
Syntax
show hardware buffer service-pool {buffer-info }
Parameters
buffer-info Enter the keyword buffer-info to view the buffer details for the service pool.
Command Modes
EXEC
EXEC Privilege
Command
History
Version Description
9.11(0.0) Introduced on the S6000, S6000–ON, S6100–ON and Z9100–ON.
Usage
Information
Use this command to view the buffer details of lossy and lossless traffic in the service pool.
Example
DellEMC#show hardware buffer service-pool buffer-info
------Buffer Details for Stack-Unit 1 portpipe 0 ------
-----------------------------------------------------------------
Service-Pool Configured Buffer(KB) Used Buffer(KB)
-----------------------------------------------------------------
SP0(Lossy) 9758 7760
SP1(Lossless) 3842 697
DellEMC#
show hardware drops
Displays internal drops on the specified interface or for a range of interface.
Syntax
show hardware drops interface interface
Parameters
drops
Enter the keyword drops to display internal drops.
interface
Enter any of the following keywords and the interface or interface range
information:
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
Command Modes
EXEC
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.14(0.0) Included the FEC BER details in the output for 25 and 50GG interfaces of the
S5048–ON.
9.12(1.0) Introduced on the S5048F–ON.
9.11(0.0)
Included the FEC BER details in the output for 100G interfaces of S6100–ON and
Z9100–ON .
Debugging and Diagnostics 515