White Papers

Version Description
9.4.(0.0) Introduced on the S-Series and Z-Series.
Usage
Information
Use this command to create a mapping between a host name server and its IP addresses for a specific
VRF.
Example
DellEMC(conf)# ip host vrf jay dell 1.1.1.1
clear host
Removes one or all dynamically learned host table entries for a specific VRF.
Syntax
clear host [vrf vrf-name] {* | host-name}
Parameters
vrf vrf-name (Optional) Enter the key word vrf and then the name of the VRF to delete
dynamically learned host table entries corresponding to that VRF.
host-name Enter the name of the host corresponding to which you want to delete the
dynamically learnt host table entries.
* Enter * to delete all host table entries.
Defaults None
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S-Series and Z-Series.
Usage
Information
Use this command to delete one or all dynamically learned host table entries corresponding to a specific
VRF.
Example
DellEMC# clear host vrf jay dell
DellEMC# clear host vrf jay *
562 Dynamic Host Configuration Protocol (DHCP)