White Papers

ManualsBrandsDell ManualsAccess PlatformsOS9

791

792

793

794

795

796

797

798

799

800

Table Of Contents

Version Description

9.10(0.0) Introduced on the S6100–ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.5(0.1) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

pre-7.7.1.0 Introduced.

Commands

● router isis — enter ROUTER mode on the switch.

distance

Define the administrative distance for learned routes.

Syntax

distance weight [ip-address mask [prefix-list]]

To return to the default values, use the no distance weight command.

Parameters

weight

The administrative distance value indicates the reliability of a routing information

source. The range is from 1 to 255. (A higher relative value indicates lower

reliability. Routes with smaller values are given preference.) The default is 115.

ip-address mask

(OPTIONAL) Enter the next-hop address in dotted decimal format and enter a

mask in either dotted decimal or /prefix format.

prefix-list

(OPTIONAL) Enter the name of a prefix list name.

Defaults weight = 115

Command Modes

● ROUTER ISIS (for IPv4)

● CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.