White Papers

How a metric value assigned to a redistributed route is advertised depends on how on the configuration
of the metric-style command. If the metric-style command is set for Narrow or Transition mode
and the metric value in the redistribute command is set to a number higher than 63, the metric value
advertised in LSPs is 63. If the metric-style command is set for Wide mode, the metric value in the
redistribute command is advertised.
Related
Commands
● default-information originate — generate a default route for the IS-IS domain.
● distribute-list out — suppress networks from being advertised in updates. This command filters
redistributed routing information.
redistribute bgp
Redistribute routing information from a BGP process.
Syntax
redistribute bgp AS number [level-1| level-1-2 | level-2] [metric metric-
value] [metric-type {external| internal}] [route-map map-name]
To return to the default values, use the no redistribute bgp command with the appropriate
parameters.
Parameters
AS number Enter a number that corresponds to the autonomous system number. The range is
from 1 to 65355.
level-1 (OPTIONAL) Routes are independently redistributed into IS-IS Level 1 routes only.
level-1-2 (OPTIONAL) Routes are independently redistributed into IS-IS Level 1 and Level 2
routes.
level-2 (OPTIONAL) Routes are independently redistributed into IS-IS as Level 2 routes
only. This setting is the default.
metric metric-
value
(OPTIONAL) The value used for the redistributed route. Use a metric value that
is consistent with the destination protocol. The range is from 0 to 16777215. The
default is 0.
metric-type
{external|
internal}
(OPTIONAL) The external link type associated with the default route advertised
into a routing domain. The two options are:
● external
● internal
route-map map-
name
map-name is an identifier for a configured route map. The route map filters
imported routes from the source routing protocol to the current routing protocol.
If you do not specify a map-name, all routes are redistributed. If you specify a
keyword, but fail to list route map tags, no routes are imported.
Defaults IS-IS Level 2 routes only
Command Modes
● ROUTER ISIS (for IPv4)
● CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
830 Intermediate System to Intermediate System (IS-IS)