White Papers

tracking interface for different clients, route metrics are scaled in the range 0 to 255, where 0 is
connected and 255 is inaccessible.
The protocol-specific resolution value calculates the scaled metric by dividing a route's cost by the
resolution value set for the route protocol:
● For ISIS, you can set the resolution in the range 1 to 1000, where the default is 10.
● For OSPF, you can set the resolution in the range 1 to 1592, where the default is 1.
● The resolution value used to map static routes is not configurable. By default, Dell EMC Networking
OS assigns a metric of 0 to static routes.
● The resolution value used to map RIP routes is not configurable. The RIP hop-count is automatically
multiplied by 16 to scale it. For example, a RIP metric of 16 (unreachable) scales to 256, which
considers the route to be DOWN.
Related
Commands
● threshold metric – configure the metric threshold used to determine the UP and/or DOWN state of a
tracked route.
● track ip route metric threshold – configure object tracking on the threshold of an IPv4 route metric.
IPv6 Object Tracking Commands
The following section describes the IPv6 object tracking commands.
The following object tracking commands apply to IPv4 and IPv6:
● debug track
● delay
● description
● show running-config track
● threshold metric
● track interface line-protocol
show track ipv6 route
Display information about all tracked IPv6 routes, including configuration, current tracked state (UP or DOWN), and the clients
which are tracking an object.
Syntax
show track ipv6 route [brief]
Parameters
brief (OPTIONAL) Display a single line summary of information for tracked IPv6 routes.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
8.3.12.0 Introduced on the S4810.
Object Tracking 977