Administrator Guide

Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
network
Specify the range of addresses in an address pool.
C9000 Series
Syntax
network network /prefix-length
Parameters
network/ prefix-
length
Specify a range of addresses. Prefix-length range is from 17 to 31.
Defaults none
Command Modes DHCP <POOL>
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
pool
Create an address pool.
C9000 Series
Syntax
pool name
Parameters
name Enter the address pool’s identifying name.
Defaults none
630 Dynamic Host Configuration Protocol (DHCP)