Administrator Guide

2. Save the running-config to the startup-config.
3. Reload the system.
show ip dhcp binding
Display the DHCP binding table.
C9000 Series
Syntax
show ip dhcp binding
Defaults none
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
Example
Dell# show ip dhcp binding
IP address Hardware address Lease expiration Type
1.1.1.253 00:00:00:00:00:10 Jan 08 2014 23:57 Automatic
1.1.1.254 00:00:00:00:00:20 Jan 08 2014 23:57 Automatic
show ip dhcp snooping
Display the contents of the DHCP binding table or display the interfaces configured with IP Source Guard.
C9000 Series
Syntax
show ip dhcp snooping [binding | source-address-validation [discard—counter
| interface interface]]
Parameters
binding Display the interfaces configured with IP Source Guard.
source-address-
validation
Display the interfaces configured with IP Source Guard.
discard-counter Display the drop count of the packets.
interface
interface
Enter the keyword interface then type one of the following interface types and
slot/port or number information:
● For a 1–Gigabit Ethernet interface, enter the keyword gigabitethernet.
● For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet.
644 Dynamic Host Configuration Protocol (DHCP)