Administrator Guide

● Configure an SNMPv3 view.
CONFIGURATION mode
snmp-server view view-name oid-tree {included | excluded}
NOTE: To give a user read and write view privileges, repeat this step for each privilege type.
● Configure the user with an authorization password (password privileges only).
CONFIGURATION mode
snmp-server user name group-name 3 noauth auth md5 auth-password
● Configure an SNMP group (password privileges only).
CONFIGURATION mode
snmp-server group groupname {oid-tree} auth read name write name
● Configure an SNMPv3 view.
CONFIGURATION mode
snmp-server view view-name 3 noauth {included | excluded}
NOTE: To give a user read and write privileges, repeat this step for each privilege type.
● Configure an SNMP group (with password or privacy privileges).
CONFIGURATION mode
snmp-server group group-name {oid-tree} priv read name write name
● Configure the user with a secure authorization password and privacy password.
CONFIGURATION mode
snmp-server user name group-name {oid-tree} auth md5 auth-password priv des56 priv
password
● Configure an SNMPv3 view.
CONFIGURATION mode
snmp-server view view-name oid-tree {included | excluded}
DellEMC(conf)#snmp-server host 1.1.1.1 traps {oid tree} version 3 ?
auth Use the SNMPv3 authNoPriv Security Level
noauth Use the SNMPv3 noAuthNoPriv Security Level
priv Use the SNMPv3 authPriv Security Level
DellEMC(conf)#snmp-server host 1.1.1.1 traps {oid tree} version 3 noauth ?
WORD SNMPv3 user name
Enable SNMPv3 traps
You must configure notify option for the SNMPv3 traps to work.
● Configure an SNMPv3 traps.
CONFIGURATION mode
snmp-server group group-name {oid-tree} priv read name write name notify name
Enter the keyword notify then a name (a string of up to 20 characters long) as the notify view name.
● Configure an SNMPv3 view for notify.
CONFIGURATION mode
snmp-server view view-name oid-tree {included | excluded}
Reading Managed Object Values
You may only retrieve (read) managed object values if your management station is a member of the same community as the
SNMP agent.
Dell EMC Networking supports RFC 4001, Textual Conventions for Internet Work Addresses that defines values representing a
type of internet address. These values display for ipAddressTable objects using the snmpwalk command.
806
Simple Network Management Protocol (SNMP)