White Papers

Example
for Q-in-Q
implementation
over VLT
DellEMC#show vlt mismatch
Domain
------
Parameters Local Peer
---------- ----- ----
PB for stp Enabled Disabled
Vlan-type-config
----------------
Codes:: P - Primary, C - Community, I - Isolated, N - Normal vlan, M -
Vlan-stack
Vlan-ID Local Peer
------- ----- ----
100 N M
Port-type-config
----------------
Codes:: p - PVLAN Promiscuous port, h - PVLAN Host port, t - PVLAN Trunk
port,
mt - Vlan-stack trunk port, mu - Vlan-stack access port, n -
Normal port
Vlt Lag Local Peer
------- ----- ----
128 mt mu
Vlan-stack protocol-type
------------------------
Local Peer
----- ----
0x4100 0x8100
VLT-VLAN config
---------------
Local Lag Peer Lag Local VLANs Peer VLANs
--------- -------- ----------- ----------
128 128 4094 100
DellEMC#
show vlt role
Displays the VLT peer status, role of the local VLT switch, VLT system MAC address and system priority, and the MAC address
and priority of the local VLT device.
Syntax
show vlt role
Default Not configured.
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
Virtual Link Trunking (VLT) 1641