White Papers

Version Description
6.1.1.1 Introduced on the E-Series.
Usage
Information
An aggregate output QoS policy applies to all outbound port traffic. An aggregate output QoS policy can
coexist with per-queue output QoS policies. If the rate shape exists in both aggregate and per-queue
qos-policy, minimum of 2 take effect. Some of all Queue-rate will not exceed aggregate.
Related
Commands
● policy-map-input — creates an input policy map.
● policy-map-output — creates an output policy map.
policy-map-input
Create an input policy map.
S6000–ON
Syntax
policy-map-input policy-map-name cpu-qos | [layer2] [cpu-qos]
To remove an input policy map, use the no policy-map-input policy-map-name cpu-qos |
[layer2] [cpu-qos] command.
Parameters
policy-map-name Enter the name of the policy map in character format (32 characters
maximum).
cpu-qos Enter the cpu-qos keyword to assign this ACL to control plane traffic only.
layer2 (OPTIONAL) Enter the keyword layer2 to specify a Layer 2 Class Map. The
default is Layer 3.
cpu-qos (OPTIONAL) Enter the keyword cpu-qos to create an input policy to be used to
rate-limit control-plane traffic (CoPP).
Defaults Layer 3
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Policy name character limit increased from 16 to 32.
1228 Quality of Service (QoS)