Release Notes

1. Reboot the system. During the reboot process, the system displays the following message prompting you to press the Esc
key in order to stop the auto-boot process:
Press Esc to stop autoboot ... 5
Grub 2.02~beta2 (Dell EMC Inc)
Built by root at ubuntu on Tue_Dec_15_13:43:07_UTC_2020
S6010 Boot Flash Label 3.26.2.10 NetBoot Label 3.26.2.10
2. At this prompt message, press the Esc key. The following menu appears:
Grub 2.02~beta2 (Dell EMC)
Built by root at ubuntu on Tue_Dec_15_13:43:07_UTC_2020
S6010-ON Boot Flash Label 3.26.2.10 NetBoot Label 3.26.2.10
+----------------------------------------------------------------------------+
|Dell EMC Networking OS |
|Dell EMC-Boot Line Interface |
|DIAG-OS |
|ONIE |
+----------------------------------------------------------------------------+
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, 'f' to boot Dell EMC Networking OS, 'b' to
go to
BLI, 'o' to boot ONIE, 'd' to boot DIAG-OS, 'e' to edit the commands
before booting or 'c' for a command-line.
3. From the menu, choose the ONIE option.
NOTE: To choose an option from the menu, highlight one of the options using the up or down arrow key and press
Enter.
The following menu appears:
GNU GRUB version 2.02~beta2+e4a1fe391
+----------------------------------------------------------------------------+
|*ONIE: Install OS |
| ONIE: Rescue |
| ONIE: Uninstall OS |
| ONIE: Update ONIE |
| ONIE: Embed ONIE |
| EDA-DIAG |
| |
| |
| |
| |
| |
| |
+----------------------------------------------------------------------------+
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands
before booting or `c' for a command-line.
4. From this menu, choose the ONIE : Install OS option.
NOTE:
To choose an option from the menu, highlight one of the options using the up or down arrow key and press
Enter.
The ONIE Installer mode is enabled and the ONIE prompt appears, as shown:
GRUB loading.
Version : 3.26.2.10
Build Date: 2020-12-15T18:15-0700
[ 1.932688] dummy-irq: no IRQ given. Use irq=N
[ 1.940430] esas2r: driver will not be loaded because no ATTO esas2r devices were
found
[ 1.982100] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 3.090824] fmc_write_eeprom fake-design-for-testing-f001: fmc_write_eeprom: no
busid passed, refusing all cards
[ 3.105813] intel_rapl: driver does not support CPU family 6 model 77
Info: Mounting kernel filesystems... done.
10