White Papers

NOTE: In UNIX, enter the snmpset command for help using this command.
The following examples show the command syntax using MIB object names and the same command using the object OIDs. In
both cases, the same index number used in the snmpset command follows the object.
The following command shows how to get a MIB object value using the object name.
> snmpget -v 2c -c private -m ./f10-copy-config.mib 10.11.131.140 copyTimeCompleted.110
FTOS-COPY-CONFIG-MIB::copyTimeCompleted.110 = Timeticks: (1179831) 3:16:38.31
The following command shows how to get a MIB object value using OID.
> snmpget -v 2c -c private 10.11.131.140 .1.3.6.1.4.1.6027.3.5.1.1.1.1.13.110
SNMPv2-SMI::enterprises.6027.3.5.1.1.1.1.13.110 = Timeticks: (1179831) 3:16:38.31
MIB Support to Display Reason for Last System
Reboot
Dell EMC Networking provides MIB objects to display the reason for the last system reboot. The dellNetProcessorResetReason
object contains the reason for the last system reboot. The following table lists the related MIB objects.
Table 110. MIB Objects for Displaying Reason for Last System Reboot
MIB Object OID Description
dellNetProcessorResetReason 1.3.6.1.4.1.6027.3.26.1.4.3.1.7 This is the table that contains the reason
for last system reboot.
dellNetProcessorResetTime 1.3.6.1.4.1.6027.3.26.1.4.3.1.8 This is the table that contains the
timestamp.
Viewing the Reason for Last System Reboot Using SNMP
● To view the reason for last system reboot using SNMP, you can use any one of the applicable SNMP commands:
The following example shows a sample output of the snmpwalk command to view the last reset reason.
[DellEMC ~]$ snmpwalk -c public -v 2c 10.16.133.172 1.3.6.1.4.1.6027.3.26.1.4.3.1.7
DELL-NETWORKING-CHASSIS-MIB::dellNetProcessorResetReason.stack.1.1 = STRING: Reboot
by Software
DELL-NETWORKING-CHASSIS-MIB::dellNetProcessorResetReason.stack.2.1 = STRING: Reboot
by Software
DELL-NETWORKING-CHASSIS-MIB::dellNetProcessorResetReason.stack.3.1 = STRING: Cold
Reset
[DellEMC ~]$
[DellEMC ~]$ snmpwalk -c public -v 2c 10.16.133.172 1.3.6.1.4.1.6027.3.26.1.4.3.1.8
DELL-NETWORKING-CHASSIS-MIB::dellNetProcessorResetTime.stack.1.1 = STRING:
2017-11-1,5:43:44.0
DELL-NETWORKING-CHASSIS-MIB::dellNetProcessorResetTime.stack.2.1 = STRING:
2017-11-1,5:43:44.0
DELL-NETWORKING-CHASSIS-MIB::dellNetProcessorResetTime.stack.3.1 = STRING:
MIB Support for Power Monitoring
Dell EMC Networking provides MIB objects to display the information for Power Monitoring. The OIDs specific to Power
Monitoring are appended to the DellITaMIbs. There are three separate DellITaMIbs available to display the current input power,
average input power and average input-power start time. These statistics can also be obtained by using the CLI command:
show
environment . The following table lists the related MIB objects, OID and description for the same:
Simple Network Management Protocol (SNMP)
827