Administrator Guide

Current Type : Z9100-ON - 34-port TE/TF/FO/FI/HU G (Z9100-ON)
Master priority : NA
Hardware Rev : 0.0
Num Ports : 130
Up Time : 3 day, 19 hr, 3 min
Dell EMC Networking OS Version : 9.13(0.0)
Jumbo Capable : yes
POE Capable : no
FIPS Mode : disabled
Boot Flash : 3.23.2.13
Boot Selector : 3.23.0.2-7
Memory Size : 3203289088 bytes
Temperature : 37C
Voltage : ok
Serial Number : NA
Part Number : 0GTG6M Rev X02
Vendor Id : NA
Date Code : NA
Country Code : NA
Piece Part ID : CN-03GT5N-77931-58A-0004
PPID Revision : X02
Service Tag : 1XVSG02
Expr Svc Code : 422 556 134 6
Auto Reboot : enabled
Burned In MAC : 4c:76:25:e5:e5:40
No Of MACs : 3
-- Power Supplies --
Unit Bay Status Type FanStatus FanSpeed Power AvgPower AvgPowerStartTime
---------------------------------------------------------------------------------------
0 1 up AC up 5760 128 136 12/14/2017-14:47
1 2 down UNKNOWN down 0 0 0 N/A
-- Fan Status --
Unit Bay TrayStatus Fan1 Speed Fan2 Speed
------------------------------------------------------------------------------------
1 1 up up 6241 up 6456
1 2 up up 6342 up 6520
1 3 up up 6271 up 6383
1 4 up up 6281 up 6499
1 5 up up 6311 up 6425
Speed in RPM
show tech-support
Display a collection of data from other show commands, necessary for Dell EMC Networking technical support to perform
troubleshooting.
Syntax
show tech-support [stack-unit unit-id | page]
Parameters
stack-unit (OPTIONAL) Enter the keywords stack-unit to view CPU memory usage for the
stack member designated by unit-id.
page (OPTIONAL) Enter the keyword page to view 24 lines of text at a time. Press the
SPACE BAR to view the next 24 lines. Press the ENTER key to view the next line
of text.
When using the pipe command ( | ), enter one of these keywords to filter command
output. For details about filtering commands, refer to CLI Basics.
save Enter the keyword save to save the command output.
flash: Save to local flash drive (flash://filename. A maximum of 20
characters.
Command Modes EXEC Privilege
Control and Monitoring 145