Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

1531

Table Of Contents

Example

DellEMC#show storm-control pfc status stack-unit 1 port-set 0

-------------------------------------------------------------------------------------------------------

Interface Priority State Duration in discard state(in ms)

Pkts Dropped(Ingress) Pkts Dropped(Egress) Pkts Dropped(Ingress,Cumulative) Pkts

Dropped(Egress,Cumulative)-------------------------------------------------------------------------------------------------------

Te 1/1/1 4 Drop 1194740 2389 135759218588 2389

135759218588

Te 1/1/1 4 Normal 0 0 0 0

clear storm-control pfc drop-counters

Clears all the ingress & egress drop counters and time since discard. The counters are reset and started afresh from 0.

Syntax

clear storm-control pfc drop-counters stack-unit {unit-number} port-set

{portpipe-number}

Parameters

unit-number

Enter the stack unit number.

portpipe-number

Enter the port set number.

Defaults None

Command Modes EXEC Privilege.

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.11(0.0) Introduced on the S6000, S6000–ON, S6100–ON, Z9100–ON.

Usage

Information

The clear storm-control pfc drop-counters command is used to clears all the ingress &

egress drop counters and time since discard on the specified stack unit and port set.

Commands

show storm-control pfc status — view the status of the PFC storm on a stack unit with a specific port

set.

show storm-control pfc statistics

You can view the statistical details of the PFC storm on a stack unit with specified port set.

Syntax

show storm-control pfc statistics stack-unit {unit-number} port-set

{portpipe-number