Administrator Guide

show ip dhcp configuration
Display the DHCP configuration.
Syntax
show ip dhcp configuration [global | pool name]
Parameters
pool name Display the configuration for a DHCP pool.
global Display the DHCP configuration for the entire system.
Defaults None
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
Example
DellEMC# show ip dhcp configuration global
Protocol status : Enabled
Number of ping packets : 1
DellEMC#
DellEMC# show ip dhcp configuration pool p1
Pool Name : p1
Pool Type : Dynamic
Domain Name : dell.com
Lease Time : 2Days 0Hrs 0Mins
DNS Servers : 10.11.0.1
Default Routers : 1.1.1.1
Network : 1.1.1.0 255.255.255.0
Dynamic Host Configuration Protocol (DHCP) 539