CLI Guide

router for Router mode
addrole Enter the keyword addrole to add permission to the command. You cannot add
or delete rights for the sysadmin role.
deleterole
Enter the keyword deleterole to remove access to the command. You cannot add
or delete rights for the sysadmin role.
role-name Enter a text string for the name of the user role up to 63 characters. These are 3
system defined roles you can modify: secadmin, netadmin, and netoperator.
reset Enter the keyword reset to reset all roles back to default for that command.
command Enter the command’s keywords to assign the command to a certain access level.
You can enter one or more keywords.
Defaults none
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Introduced on the Z9000, S6000, S4820T, S4810, and MXL.
Related
Commands
● userrole — creates user roles.
show role
Display information on permissions assigned to a command, including user role and/or permission level.
Syntax
show role mode {mode} {command}
Parameters
command Enter the command’s keywords to assign the command to a certain access level.
You can enter one or all of the keywords.
mode mode Enter keyword then one of the following modes.
● configure
● exec
● interface
● line
● route-map
● router
Defaults none
1498 Security