CLI Guide

Version Description
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Usage
Information
The following Example displays a group named ngroup. The ngroup has a security model of version 3 (v3)
with authentication (auth), the read and notify name is nview with no write view name specified, and
finally the row status is active.
Example
DellEMC# show snmp group
groupname: v1v2creadg security model: v1
readview : v1v2cdefault writeview: no write view specified
notifyview: v1v2cdefault context: no context specified
row status: active
DellEMC#
Related
Commands
● snmp-server group — configures an SNMP server group.
show snmp supported-mibs
Display the list of SNMP MIBs supported by the platform.
Syntax
show snmp supported-mibs
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.14(0.0) Introduced on the C9010, FN-IOM, MIOA, MXL, S3048–ON, S3100, S4048–ON,
S4048T-ON, S5048F-ON, S6000, S6000–ON, S6010–ON, S6100–ON and Z9100–
ON.
Example
DellEMC#show snmp supported-mibs
MIB OID
---------------------------------------------------------
RFC1155-SMI -
RFC-1212 -
SNMPv2-SMI -
SNMPv2-TC -
SNMPv2-CONF -
INET-ADDRESS-MIB -
IANAifType-MIB -
IANA-ADDRESS-FAMILY-NUMBERS-MIB -
IANA-RTPROTO-MIB -
IPV6-FLOW-LABEL-MIB -
SNMPv2-MIB 1.3.6.1.2.1
IF-MIB 1.3.6.1.2.1.31
IP-MIB 1.3.6.1.2.1.48
TCP-MIB 1.3.6.1.2.1.49
UDP-MIB 1.3.6.1.2.1.50
1528 Simple Network Management Protocol (SNMP) and Syslog