CLI Guide

Version Description
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage
Information
If you configure the neighbor maximum-prefix command and the neighbor receives more prefixes
than the neighbor maximum-prefix command configuration allows, the neighbor goes down and the
show ip bgp summary command displays (prfxd) in the State/PfxRcd column for that neighbor. The
neighbor remains down until you enter the clear ip bgp command for the neighbor or the peer group
to which the neighbor belongs or you enter the neighbor shutdown and neighbor no shutdown
commands.
Related
Commands
● show ip bgp summary — display the current BGP configuration.
neighbor next-hop-self
Allows you to configure the router as the next hop for a BGP neighbor.
Syntax
neighbor {ip-address | peer-group-name} next-hop-self [all]
To return to the default setting, use the no neighbor {ip-address | peer-group-name}
next-hop-self [all] command.
Parameters
ip-address Enter the IP address of the neighbor in dotted decimal format.
peer-group-name Enter the name of the peer group.
all Specifies that the route reflector is the next hop for both iBGP and eBGP-learned
routes.
Defaults Disabled.
Command Modes ROUTER BGP
Command
History
Version Description
9.10(0.0) Introduced the all keyword on the S4810, S4820, S4048–ON, S3048–ON, S3100
series, S6010–ON, S4040T-ON, S5000, S6000, S6000–ON, S6100–ON, Z9100–
ON, and Z9500.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.7.0 Introduced on the S4810.
Border Gateway Protocol 395