CLI Guide

Table Of Contents

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000

8.3.7.0 Introduced on the S4810.

7.7.1.0 Introduced on the C-Series and E-Series.

Example

DellEMC# show boot system stack-unit 1

Current system image information in the system:

=============================================

Type Boot Type A B

---------------------------------------------------

Stack-unit 1 FLASH BOOT 9-0(2-1) 9-0(2-0)[boot]

DellEMC#

show bootvar

Display the variable settings for the boot parameters.

Syntax