Connectivity Guide

To remove the limit on the maximum number of routes used, use the no maximum dynamic-routes
command.
Parameters
limit Maximum number of routes allowed in a VRF. The valid range is from 1 to 320,000
(or maximum allowable for that platform if a smaller value).
warning-
threshold
The warning threshold value is a percentage of the limit value. When the number of
routes reaches the specified percentage of the limit, a warning message appears.
The valid range is from 1 to 100.
After the limit is reached, additional dynamic routes are not allowed.
warning-only When you use the warning-only option, when the maximum number of dynamic
routes reaches the limit, a warning message appears.
After the limit is reached, additional dynamic routes are still allowed.
Defaults No limit is set on the maximum number of dynamic routes for a VRF.
Command Modes
CONFIGURATION-VRF
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking Command Line Reference Guide.
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON and Z9500.
9.4(0.0) Introduced on the S–Series.
Usage
Information
If you do not specify the maximum route limit for a VRF, the VRF has unlimited space that extends to the
maximum number of entries allowed for the system.
show ip vrf
Displays information corresponding to the VRFs that you configure in the system.
Syntax
show ip [vrf vrf-name]
Parameters
vrf vrf-name Enter the keyword vrf then the name of the VRF to display information
corresponding to that VRF.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
1638 Virtual Routing and Forwarding (VRF)