Connectivity Guide

Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.13(0.0) Updated to show VLT peer’s local macs.
9.12(1.0) Introduced on the S5048F–ON.
9.11(0.0) Introduced the static mode on the S4048–ON, S4048T-ON, S6000–ON, S6010–
ON, S6100–ON, and Z9100–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
Example
DellEMC# show vxlan vxlan-instance <1> unicast-mac-local
Total Local Mac Count: 5
VNI MAC PORT VLAN
4656 00:00:02:00:03:00 Tf 1/17 0
4656 00:00:02:00:03:01 Tf 1/17 0
4656 00:00:02:00:03:02 Tf 1/17 0
4656 00:00:02:00:03:03 Tf 1/17 0
4656 00:00:02:00:03:04 Tf 1/17 0
Related
Commands
vxlan-instance- Enable VXLAN Instance configuration on the platform.
show vxlan vxlan-instance unicast-mac-remote
Displays the information of the remote unicast MACs associated with the logical network related to Network Virtualization
Overlay (NVO) Gateway.
Syntax
show vxlan vxlan-instance instance ID unicast-mac-remote [logical-network
name | vnid VNID]
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the
initial release.
name (Optional) Enter the name of VXLAN logical network with a maximum length of 30
characters.
vnid VNID (Optional) Enter the keyword vnid and then enter the ID of the VXLAN. The range
is from 1 to 16777215.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.13(0.0) Updated to show VLT peer’s local macs.
9.12(1.0) Introduced on the S5048F–ON.
1684 Virtual Extensible LAN (VXLAN)