Connectivity Guide

Parameters
ip-address Enter the IP address of the neighbor in dotted decimal format.
peer-group-name Enter the name of the peer group to set the advertisement interval for all routers in
the peer group.
as-number Enter the AS number to reset all neighbors belonging to that AS. The range is from
0 to 65535 (2 byte), from 1 to 4294967295 (4 byte) or from 0.1 to 65535.65535
(dotted format).
no prepend Specifies that local AS values do not prepend to announcements from the neighbor.
Defaults Not configured.
Command Modes ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage
Information
If a local-as is configured, BGP does not allow for the configuration of BGP confederation. Similarly, if
BGP confederation is configured, then BGP does not allow the configuration of local-as.
This command automatically restarts the neighbor session for the configuration to take effect.
Related
Commands
● bgp four-octet-as-support — enable 4-byte support for the BGP process.
neighbor maximum-prefix
Control the number of network prefixes received.
Syntax
neighbor {ip-address | peer-group-name} maximum-prefix maximum [threshold]
[warning-only]
To return to the default values, use the no neighbor {ip-address | peer-group-name}
maximum-prefix maximum command.
Parameters
ip-address Enter the IP address of the neighbor in dotted decimal format.
384 Border Gateway Protocol