Connectivity Guide

Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series.
7.5.1.0 Introduced.
Usage
Information
Executing this command without the optional ring-id command clears the statistics counters on all
the available rings. Dell EMC Networking OS requires a command line confirmation before the command
executes. This command clears the following counters:
● hello Rx and Tx counters
● Topology change Rx and Tx counters
● The number of state change counters
Example
DellEMC# clear frrp
Clear frrp statistics counter on all ring [confirm] yes
DellEMC#clear frrp 4
Clear frrp statistics counter for ring 4 [confirm] yes
DellEMC#
Related
Commands
● show frrp — display the Resilient Ring Protocol configuration.
debug frrp
Clear the FRRP statistics counters.
Syntax
debug frrp {event | packet | detail} [ring-id] [count number]
To disable debugging, use the no debug frrp {event | packet | detail} {ring-id}
[countnumber] command.
Parameters
event Enter the keyword event to display debug information related to ring protocol
transitions.
packet Enter the keyword packet to display brief debug information related to control
packets.
detail Enter the keyword detail to display detailed debug information related to the
entire ring protocol packets.
ring-id (Optional) Enter the ring identification number. The range is from 1 to 255.
Force10 Resilient Ring Protocol (FRRP) 605