Deployment Guide

Figure 148. Sample Configuration of IPv6 Peer Routing in a VLT Domain
Neighbor Solicitation from VLT Hosts
Consider a case in which NS for VLT node1 IP reaches VLT node1 on the VLT interface and NS for VLT node1 IP reaches VLT
node2 due to LAG level hashing in the ToR. When VLT node1 receives NS from VLT VLAN interface, it unicasts the NA packet
on the VLT interface. When NS reaches VLT node2, it is flooded on all interfaces including ICL. When VLT node 1 receives NS on
ICL, it floods the NA packet on the VLAN. If NS is unicast and if it reaches the wrong VLT peer, it is lifted to the CPU using ACL
entry. Then wrong peer adds a tunnel header and forwards the packet over ICL.
Neighbor Advertisement from VLT Hosts
Consider an example in which NA for VLT node1 reaches VLT node1 on the VLT interface and NA for VLT node1 reaches VLT
node2 due to LAG level hashing in ToR. When VLT node1 receives NA on VLT interface, it learns the Host MAC address on VLT
interface. This learned neighbor entry is synchronized to VLT node2 as it is learned on VLT interface of Node2. If VLT node2
receives a NA packet on VLT interface which is destined to VLT node1, node 2 lifts the NA packet to CPU using an ACL entry
then it adds a tunnel header to the received NA and forwards the packet to VLT node1 over ICL. When VLT node1 receives
NA over ICL with tunnel header it learns the Host MAC address on VLT port channel interface. This learned neighbor entry is
synchronized to VLT node2 as it is learned on VLT interface of Node2.
If NA is intended for a VLT peer and DIP is LLA of the peer, it is lifted to the CPU and tunneled to the peer. VLT nodes drop the
NA packet if the NA is received over ICL without a tunneling header.
Neighbor Solicitation from Non-VLT Hosts
Consider a sample scenario in which NS for VLT node1 IP reaches VLT node1 on a non-VLT interface and NS for VLT node1 IP
reaches VLT node2 on a non-VLT interface. When VLT node1 receives NS from a non-VLT interface, it unicasts the NA packet
on the received interface. When NS reaches VLT node2, it floods on all interfaces including ICL. When VLT node 1 receives NS
on the ICL, it floods the NA packet on the VLAN. If NS is unicast and if it reaches the wrong VLT peer, it is lifted to the CPU
using the ACL entry. Then the wrong peer adds a tunnel header and forwards the packet over the ICL.
Neighbor Advertisement from Non-VLT Hosts
Consider a situation in which NA for VLT node1 reaches VLT node1 on a non-VLT interface and NA for VLT node1 reaches
VLT node2 on a non-VLT interface. When VLT node1 receives NA on a VLT interface, it learns the Host MAC address on the
received interface. This learned neighbor entry is synchronized to VLT node2 as it is learned on ICL. If VLT node2 receives a NA
packet on non-VLT interface which is destined to VLT node1, node 2 lifts the NA packet to CPU using an ACL entry then it adds
a tunnel header to the received NA and forwards the packet to VLT node1 over ICL. When VLT node1 received NA over ICL with
tunnel header it learns the Host MAC address on the ICL. Host entries learned on ICL will not be synchronized to the VLT peer.
If NA is intended for VLT peer and DIP is LLA of peer, it is lifted to CPU and tunneled to the peer. VLT nodes will drop NA
packet, If NA is received over ICL without tunneling header.
992
Virtual Link Trunking (VLT)