Developers Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

1111

Table Of Contents

Version Description

9.12(1.0) Introduced on the S5048F–ON.

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.2(1.0) Introduced on the Z9500.

9.1.(0.0) Introduced on the S4810 and Z9000.

8.4.2.0 Introduced on the E-Series.

8.3.19.0 Introduced on the S4820T.

Usage

Information

Before you enable IPsec encryption on an OSPFv3 interface, first enable IPv6 unicast routing globally,

configure an IPv6 address and enable OSPFv3 on the interface, and assign the interface to an area.

An SPI value must be unique to one IPsec security policy (authentication or encryption) on the router.

Configure the same encryption policy (same SPI and key) on each OSPFv3 interface in a link.

To remove an IPsec encryption policy from an interface, enter the no ipv6 ospf encryption spi

number command. To remove null authentication on an interface to allow the interface to inherit the

authentication policy configured for the OSPFv3 area, enter the no ipv6 ospf no ipv6 ospf

encryption null command.

ipv6 ospf graceful-restart helper-reject

Configure an OSPFv3 interface to not act upon the Grace LSAs that it receives from a restarting OSPFv3 neighbor.

Syntax

ipv6 ospf graceful-restart helper-reject

To disable the helper-reject role, enter no ipv6 ospf graceful-restart helper-reject.

Defaults The helper-reject role is not configured.

Command Modes INTERFACE

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.