Developers Guide

Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Introduced support for OSPFv3 on the S4810 and Z9000.
8.3.19.0 Introduced on the S4820T.
7.8.1.0 Added support for the C-Series.
7.4.1.0 Introduced on the E-Series.
Usage
Information
By default, no interfaces are passive. Routing updates are sent to all interfaces on which the routing
protocol is enabled.
If you disable the sending of routing updates on an interface, the particular address prefix continues to be
advertised to other interfaces, and updates from other routers on that interface continue to be received
and processed.
OSPFv3 for IPv6 routing information is not sent or received through the specified router interface. The
specified interface address appears as a stub network in the OSPFv3 for IPv6 domain.
On configuring suppression using the passive-interface command, the state of the OSPF neighbor does
not change to INIT; instead, the state of the OSPF neighbor changes to DOWN after the dead-timer
expires.
redistribute
Redistribute into OSPFv3.
Syntax
redistribute {bgp as number}{connected | static}[metric metric-value |
metric-type type-value] [route-map map-name] [tag tag-value]
To disable redistribution, use the no redistribute {connected | static} command.
Parameters
bgp as number
Enter the keyword bgp then the autonomous system number.
The range is from 1 to 65535.
connected
Enter the keyword connected to redistribute routes from physically connected
interfaces.
static
Enter the keyword static to redistribute manually configured routes.
metric metric-
value
Enter the keyword metric then the metric value.
The range is from 0 to 16777214.
The default is 20.
metric-type
type-value
(OPTIONAL) Enter the keywords metric-type then the OSPFv3 link state type
of 1 or 2 for default routes. The values are:
● 1 for a type 1 external route
● 2 for a type 2 external route
The default is 2.
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of an established
route map. If the route map is not configured, the default is deny (to drop all
routes).
tag tag-value
(OPTIONAL) Enter the keyword tag to set the tag for routes redistributed into
OSPFv3.
1124 Open Shortest Path First (OSPFv2 and OSPFv3)