Setup Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

1551

Table Of Contents

Commands

● preferred-method — configure the preferred method for contacting the person.

preferred-method

Configure the preferred method for contacting the person.

Syntax

preferred-method {email | no-contact | phone]

Parameters

email Enter the keyword email to specify email as preferred method.

no-contact Enter the keywords no-contact to specify that there is no preferred method.

phone Enter the keyword phone to specify phone as preferred method.

Defaults no-contact

Command Modes SUPPORTASSIST PERSON

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.11(0.0) Introduced on the M I/O Aggregator and FN IOM.

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.

9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,

S6000–ON, Z9500, MXL.

Commands

● email-address — configure email addresses to reach the contact person.

● phone — configure phone numbers to reach the contact person.

time-zone

Configure the time zone for contacting the person.

Syntax

time-zone zone +-HH:MM[start-time HH:MM] [end-time HH:MM]

To remove the time zone, use the no time-zone [zone | start-time | end-time] command.

Parameters

zone

+-HH:MM

Enter the keyword zone then a time difference from GMT expressed as HH:MM.

This number may be preceded by either a + or – sign.

start-time

HH:MM

Enter the keywords start-time then a starting time expressed as HH:MM. Use

the 24-hour clock format.

stop-time