Users Guide

Version Description
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage
Information
On the Z9100-ON, SMF intelligent controller takes care of the LED status and alarms. If a redundant (second)
PSU goes down or is removed, only a syslog message about the PSU down or removal event is generated and the
front PSU LED changes to blinking amber. The system does not display any alarm in the show alarms command
output. The presence of a single PSU is treated as a minor alarm. The front panel system status LED is not
affected (solid Green).
Example
MAA-Z9100-7752#show alarms
Alarm Type Duration
-------------------------------------------------------------------------------
Controlling Bridge:
==================
Minor Alarms
No minor alarms
Major Alarms
No major alarms
show cpu-traffic-stats
View the CPU traffic statistics.
Syntax
show cpu-traffic-stats [port number | all | cp ]
Parameters
port number (OPTIONAL) Enter the port number to display traffic statistics on that port only.
The range is from 1 to 1568.
all (OPTIONAL) Enter the keyword all to display traffic statistics on all the
interfaces receiving traffic, sorted based on the traffic.
cp (OPTIONAL) Enter the keyword cp to display traffic statistics on the specified
CPU.
Defaults all
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
Control and Monitoring 125