Administrator Guide

Table Of Contents
To remove the match filter for the crypto map, use the no match seq-num tcp [source ip
address | ipv6 address {mask} {source-port number}] [destination ip address
| ipv6 address {mask} {destination-port number}] command.
Parameters
seq-num
Enter the match command sequence number.
source
ip-address
| ipv6 address
Enter the keyword source then the IPv4 or IPv6 address for the source.
mask
Enter the mask prefix length in /nn format.
source-port
number
Enter the source port number.
destination-port
number
Enter the destination port number.
Defaults none
Command Modes CONFIG-CRYPTO-POLICY
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(0.2) Introduced on the Z9000, S4810, and S4820T.
Usage
Information
IPv4 addresses support only -/32 mask types.
IPv6 addresses support only -/128 mask types.
Configure match for bi-directional traffic for optimal routing.
Only TCP is supported.
Example
match 0 tcp a::1 /128 0 a::2 /128 23
match 1 tcp a::1 /128 23 a::2 /128 0
match 2 tcp a::1 /128 0 a::2 /128 21
match 3 tcp a::1 /128 21 a::2 /128 0
match 4 tcp 1.1.1.1 /32 0 1.1.1.2 /32 23
match 5 tcp 1.1.1.1 /32 23 1.1.1.2 /32 0
match 6 tcp 1.1.1.1 /32 0 1.1.1.2 /32 21
match 7 tcp 1.1.1.1 /32 21 1.1.1.2 /32 0
session-key
Specify the session keys used in the crypto policy entry.
Z9000
Syntax
session-key {inbound | outbound} {ah spi hex-key-string | esp spi encrypt
hex-key-string auth hex-key-string
To delete the session key information from the crypto policy, use the no session-key {inbound |
outbound} {ah | esp} command.
Parameters
name
Enter the name for the transform set.
inbound Specify the inbound session key for IPSec.
outbound Specify the outbound session key for IPSec.
ah Use the AH protocol when you select the AH transform set in the crypto policy.
Internet Protocol Security (IPSec) 571