Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

731

732

733

734

735

736

737

738

739

740

Table Of Contents

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.7.1.0 Introduced on the S-Series.

7.6.1.0 Introduced on the C-Series.

7.4.1.0 Introduced on the E-Series.

Usage

Information

For details about using this command, refer to the “NIC Teaming” section of the Layer 2 chapter in the

Dell Networking OS Configuration Guide.

mac learning-limit

Limit the maximum number of MAC addresses (static + dynamic) learned on a selected interface.

Z9000

Syntax

mac learning-limit address_limit [vlan vlan-id] [station-move-violation

[dynamic]] [dynamic [no-station-move| station-move]]

Parameters

address_limit

Enter the maximum number of MAC addresses that can be learned on the

interface. The range is from 1 to 1000000.

vlan

vlan-id

Enter the keyword then the VLAN ID. The range is from 1 to 4094.

dynamic (OPTIONAL) Enter the keyword dynamic to allow aging of MACs even though a

learning limit is configured.

station-move-

violation

(OPTIONAL) Enter the keywords station-move to allow a station move on

learned MAC addresses.

no-station-move (OPTIONAL) Enter the keywords no-station-move to internally the treat the

MAC addresses as static and allow the MAC addresses learnt to be installed on all

port-pipes.

Defaults

● On S-Series, the default behavior is dynamic.

NOTE: “Static” means manually entered addresses, which do not age.

Command Modes INTERFACE