White Papers

Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
snmp-server enable traps
Enable SNMP traps.
Syntax
snmp-server enable traps [notification-type] [notification-option]
To disable traps, use the no snmp-server enable traps [notification-type]
[notification-option] command.
Parameters
notification-type Enter the type of notification from the following list:
● bgp — Enable BGP state change traps.
● config — Enable copy-config trap.
● ecfm — Enable ECFM state change traps.
● ecmp — Enable ECMP traps.
● entity — Enable entity change traps.
● envmon — Enable SNMP environmental monitor traps.
● ets — Enable ETS traps.
● fips — Enable FIP Snooping state change traps.
● isis — Enable ISIS adjacency change traps.
● lacp — Enable LACP state change traps.
● mac — Enable MAC address notification traps.
● pfc — Enable PFC traps.
● snmp — Enable SNMP traps.
● stp — Enable 802.1d state change traps.
● vlt — Enable VLT traps.
● vrrp — Enable VRRP state change traps.
● xstp — Enable 802.1s, 802.1w, and PVST+ state change traps.
notification-
option
For the envmon notification-type, enter one of the following optional parameters:
● cam-utilization
● fan
● supply
● temperature
For the snmp notification-type, enter one of the following optional parameters:
● authentication
● coldstart
1468 Simple Network Management Protocol (SNMP) and Syslog