Manualshelf

White Papers

ManualsBrandsDell ManualsAccess PlatformsOS9
131132133134135136137138139140
Table Of Contents
State Description
Init The local system is communicating.
Up Both systems are exchanging control packets.
The session is declared down if:
● A control packet is not received within the detection time.
● Sufficient echo packets are lost.
● Demand mode is active and a control packet is not received in response to a poll packet.
BFD Three-Way Handshake
A three-way handshake must take place between the systems that participate in the BFD session.
The handshake shown in the following illustration assumes that there is one active and one passive system, and that this session
is the first session established on this link. The default session state on both ports is Down.
1. The active system sends a steady stream of control packets that indicates that its session state is Down, until the passive
system responds. These packets are sent at the desired transmit interval of the Active system. The Your Discriminator field
is set to zero.
2. When the passive system receives any of these control packets, it changes its session state to Init and sends a response
that indicates its state change. The response includes its session ID in the My Discriminator field and the session ID of the
remote system in the Your Discriminator field.
3. The active system receives the response from the passive system and changes its session state to Up. It then sends a
control packet indicating this state change. This is the third and final part of the handshake. Now the discriminator values
have been exchanged and the transmit intervals have been negotiated.
4. The passive system receives the control packet and changes its state to Up. Both systems agree that a session has been
established. However, because both members must send a control packet — that requires a response — anytime there is a
state change or change in a session parameter, the passive system sends a final response indicating the state change. After
this, periodic control packets are exchanged.
Figure 10. BFD Three-Way Handshake State Changes
Bidirectional Forwarding Detection (BFD)
135