Administrator Guide

Defaults 15 seconds
Command Modes CONFIGURATION (conf-pvst)
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced.
Related
Commands
● vlan bridge-priority — sets the bridge-priority value.
● vlan hello-time — changes the time interval between BPDUs.
● vlan max-age — changes the time interval before PVST+ refreshes.
● show spanning-tree pvst — displays the PVST+ configuration.
vlan hello-time
Set the time interval between generation of PVST+ 7 BPDUs.
S3048
Syntax
vlan vlan-range hello-time seconds
To return to the default value, use the no vlan hello-time command.
Parameters
vlan vlan-range Enter the keyword vlan then the VLAN numbers. The range is from 1 to 4094.
hello-time
seconds
Enter the keywords hello-time then the time interval, in seconds, between
transmission of BPDUs. The range is from 1 to 10 seconds. The default is 2
seconds.
Defaults 2 seconds
Command Modes CONFIGURATION (conf-pvst)
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
1216 Per-VLAN Spanning Tree Plus (PVST+)