Administrator Guide

Version Description
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S3100 series, S4048–ON, S4048–ON, S4810, S4820T, S5000,
S6000, S6000–ON, S6100–ON, the Configuration Terminal Batch mode on C9010,
Z9100–ON, and Z9500.
9.9(0.0) Introduced on the C9010.
Usage
Information
The dot1x profile command configures a dot1x profile to define a list of trusted supplicant MAC
addresses. Maximum number of dot1x profiles is limited to 10. This command launches dot1x profile mode
for entering profile related commands such as the mac command. The dot1x static-mab command
assigns the dot1x profile to an interface.
Use this command in Configuration Terminal Batch mode to configure the dot1x profile in a dual-homing
setup.
Related
Commands
● dot1x static-mab
● mac
dot1x quiet-period
Set the number of seconds that the authenticator remains quiet after a failed authentication with a client.
Syntax
dot1x quiet-period seconds
To disable quiet time, use the no dot1x quiet-time command.
Parameters
seconds Enter the number of seconds. The range is from 1 to 65535. The default is 60.
Defaults 60 seconds
Command Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
7.6.1.0 Introduced on the C-Series and S-Series.
7.4.1.0 Introduced on the E-Series.
172 802.1X