Administrator Guide

Parameters
interval Enter the keyword interval to set the wait time. The range is from 5 to 120
seconds. The default is 5 seconds.
retry-times Enter the keywords retry-times to set the number of times the request interval
is extended until a CSNP is received from the helping router. The range is from 1 to
10 attempts. The default is 1.
Defaults See Parameters.
Command Modes ROUTER ISIS
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.3.1.0 Introduced on the E-Series.
graceful-restart t2
Configure the wait time for the graceful restart timer T2 that a restarting router uses as the wait time for each database to
synchronize.
Syntax
graceful-restart t2 {level-1 | level-2} seconds
To return to the default, use the no graceful-restart t2 command.
Parameters
level-1, level-2 Enter the keywords level-1 or level-2 to identify the database instance type
to which the wait interval applies.
seconds Enter the gracefule-restart t2 time in seconds. The range is from 5 to 120
seconds. The default is 30 seconds.
Defaults 30 seconds
Command Modes ROUTER ISIS
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
822 Intermediate System to Intermediate System (IS-IS)