Administrator Guide

Link Aggregation Control Protocol (LACP)
This section contains commands for Dell EMC Networks’ implementation of the link aggregation control protocol (LACP) for
creating dynamic link aggregation groups (LAGs) — known as “port-channels” in the Dell EMC Networking OS.
NOTE: For static LAG commands based on the standards specified in the IEEE 802.3 Carrier sense multiple access with
collision detection (CSMA/CD) access method and physical layer specifications, see Port Channel Commands .
Topics:
• clear lacp counters
• debug lacp
• lacp long-timeout
• lacp port-priority
• lacp system-priority
• port-channel-protocol lacp
• show lacp
clear lacp counters
Clear port channel counters.
Syntax
clear lacp port-channel-number counters
Parameters
port-channel-
number
Enter a port-channel number. The range is from 1 to 128.
Defaults Without a Port Channel specified, the command clears all Port Channel counters.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
27
Link Aggregation Control Protocol (LACP) 865