White Papers

OSPFv3 for IPv6 routing information is not sent or received through the specified router interface. The
specified interface address appears as a stub network in the OSPFv3 for IPv6 domain.
On configuring suppression using the passive-interface command, the state of the OSPF neighbor does
not change to INIT; instead, the state of the OSPF neighbor changes to DOWN after the dead-timer
expires.
redistribute
Redistribute into OSPFv3.
Syntax
redistribute {bgp as number}{connected | static}[metric metric-value |
metric-type type-value] [route-map map-name] [tag tag-value]
To disable redistribution, use the no redistribute {connected | static} command.
Parameters
bgp as number
Enter the keyword bgp then the autonomous system number.
The range is from 1 to 65535.
connected
Enter the keyword connected to redistribute routes from physically connected
interfaces.
static
Enter the keyword static to redistribute manually configured routes.
metric metric-
value
Enter the keyword metric then the metric value.
The range is from 0 to 16777214.
The default is 20.
metric-type
type-value
(OPTIONAL) Enter the keywords metric-type then the OSPFv3 link state type
of 1 or 2 for default routes. The values are:
● 1 for a type 1 external route
● 2 for a type 2 external route
The default is 2.
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of an established
route map. If the route map is not configured, the default is deny (to drop all
routes).
tag tag-value
(OPTIONAL) Enter the keyword tag to set the tag for routes redistributed into
OSPFv3.
The range is from 0 to 4294967295
The default is 0.
Defaults Not configured.
Command Modes
ROUTER OSPF for OSPFv2
ROUTER OSPFv3 for OSPFv3
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
Open Shortest Path First (OSPFv2 and OSPFv3) 1135