White Papers

ManualsBrandsDell ManualsAccess PlatformsOS9

1271

Table Of Contents

Parameters

map-name

Enter the name of the DSCP color map. The map name can have a maximum of 32

characters.

Defaults None

Command Modes CONFIGURATION

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.5(0.1) Introduced on the Z9500.

9.7(0.0) Introduced on the S6000-ON.

9.5.0.0 Introduced on the Z9000, S6000, S4820T, S4810, and MXL.

Usage

Information

A color map outlines the codepoint mappings to the appropriate color mapping (green, yellow, red) for the

traffic. The system uses this information use to handle the traffic on the interface based on the traffic

priority and places it into the appropriate shaping queue. You cannot delete a DSCP color map when it

is configured on an interface. If you do, all the DSCP values are set to green (low drop precedence). To

delete the DSCP color map that is being used by one or more interfaces, remove the DSCP map from

each interface.

Example

DellEMC(conf)#qos dscp-color-map mymap

Commands

● qos dscp-color-map— associates the DSCP color map profile with an interface so that all IP packets

received on it is given a color based on that color map.

● dscp— sets the number of specific DSCP values for color map profile to yellow or red.

qos dscp-color-policy

Associates the DSCP color map profile with an interface so that all IP packets received on it is given a color based on that color

map.

Syntax

dscp-color-policy color-map-profile-name

To remove a color policy map profile, use the no dscp-color-policy color-map-profile-name

command.

Parameters

color-map-

profile-name

Enter the color map profile name. The name can have a maximum of 32 characters.